A simulation study of single-vendor, single and multiple-manufacturers supply chain system, with stochastic demand and two distribution policies

Authors

  • Kehinde Adegbola Operation Research and Business informatics Department, Wroclaw University of Science and Technology, Wroclaw, Poland

DOI:

https://doi.org/10.31181/jdaic10010052023a

Keywords:

Supply chain management, simulation optimization, distribution policy, vendor managed inventory, JRP

Abstract

This paper addresses the long-standing stochastic single-vendor, multi-manufacturer inventory control problem, using simulation optimization. It is assumed that Manufacturers producing similar goods experience very high random demand; hence, safety stock of raw materials is held in reserve in their warehouses. The vendor supplying this raw material (principal ingredients) as a policy restricts shipments to multiples of full truck load. Thus, it is necessary to take replenishment decision and coordinate delivery among these manufacturers. To solve this problem, we modeled the single vendor, single manufacturer version of the problem (AlDurgam et al., 2017) using simulation optimization techniques, which was validated numerically using parameters and results from AlDurgam et al. (2017). The simulation model was modified systematically to relax the single manufacturer assumption under two distribution policies namely, joint reorder point and vendor managed inventory. These policies were evidently modeled with stringent conditions in literature. A numerical example was provided to compare the performances of the two proposed policies, and the VMI policy was found to performed better in terms of financial savings. Lastly, we investigate the robustness of the famous continuous review (Q, R) inventory policy which is widely used in the mathematical modeling of this problem, against the common cycle assumption. The coefficient of variation is thus suggested as a judgment criterion of when to embrace simulation modeling ahead of other modeling techniques.

Downloads

Download data is not yet available.

References

Abdul-Jalbar, B., Gutiérrez, J.M., & Sicilia, J. (2008). Policies for a single-vendor multi-buyer system with finite production rate. Decision Support Systems, 46(1), 84-100.

AlDurgam, M., Adegbola, K., & Glock, C.H. (2017). Single-vendor single-manufacturer inventory model with stochastic demand and variable production rate. International Journal of Production Economics, 59(1), 297-304.

Aritonang, K., Nainggolan, M., & Djunaidi, A. V. (2020). Integrated Supply Chain for a Single Vendor and Multiple Buyers and Products with Crashing Lead Time. International Journal of Technology, 11(3), 642-651.

Banerjee, A. & Burton, J.S. (1994). Coordinated vs. independent inventory replenishment policies for a vendor and multiple buyers. International Journal of Production Economics, 35(1), 215-222.

Ben-Daya, M., As'ad, R., & Nabi, K.A. (2019). A single-vendor multi-buyer production remanufacturing inventory system under a centralized consignment arrangement. Computers & Industrial Engineering, 135, 10-27.

Ben-Daya, M., Hassini, E., Hariga, M., & AlDurgam, M. M. (2013). Consignment and vendor managed inventory in single-vendor multiple buyers supply chains. International Journal of Production Research, 51(5), 1347-1365.

Bylka, S. (1999). A dynamic model for the single-vendor, multi-buyer problem. International Journal of Production Economics, 59(1), 297-304.

Castellano, D., Gallo, M., & Santillo, L.C. (2020). A periodic review policy for a coordinated single vendor-multiple buyers supply chain with controllable lead time and distribution-free approach. 4OR, 19(3), 347-388.

Chan, C.K., & Kingsman, B.G. (2007). Coordination in a single-vendor multi-buyer supply chain by synchronizing delivery and production cycles. Transportation Research Part E: Logistics and Transportation Review, 43(2), 90-111.

Chan, C.K., & Lee, Y.C.E. (2012). A co-ordination model combining incentive scheme and co-ordination policy for a single-vendor–multi-buyer supply chain. International Journal of Production Economics, 135(1), 136-143.

Chan, C.K., Fang, F., & Langevin, A. (2018). Single-vendor multi-buyer supply chain coordination with stochastic demand. International Journal of Production Economics, 206, 110-133.

Chan, C.K., Lee, Y.C.E., & Goyal, S.K. (2010). A delayed payment method in co-ordinating a single-vendor multi-buyer supply chain. International Journal of Production Economics, 127(1), 95-102.

Chu, C.L., & Leon, V.J. (2008). Single-vendor multi-buyer inventory coordination under private information. European Journal of Operational Research, 191(2), 485-503.

Darwish, M.A., & Odah, O.M. (2010). Vendor managed inventory model for single-vendor multi-retailer supply chains. European Journal of Operational Research, 204(3), 473-484.

Fauza, G., Amer, Y., Lee, S.H., & Prasetyo, H. (2016). An integrated single-vendor multi-buyer production-inventory policy for food products incorporating quality degradation. International Journal of Production Economics, 182, 409-417.

Glock, C.H., & Kim, T. (2014). Container management in a single-vendor-multiple-buyer supply chain. Logistics Research, 7, 1-16.

Hoque, M.A. (2008). Synchronization in the single-manufacturer multi-buyer integrated inventory supply chain. European Journal of Operational Research, 188(3), 811-825.

Hoque, M.A. (2011). An optimal solution technique to the single-vendor multi-buyer integrated inventory supply chain by incorporating some realistic factors. European Journal of Operational Research, 215(1), 80-88.

Ignall, E.I., Kolesar, P., & Walker, W.E. (1978). Using simulation to develop and validate analytic models: some case studies. Journal of Operation Research, 26(2), 237-253.

Jha, J.K., & Shanker, K. (2013). Single-vendor multi-buyer integrated production-inventory model with controllable lead time and service level constraints. Applied Mathematical Modelling, 37(4), 1753-1767.

Kim, C.O., Jun, J., Baek, J.K., Smith, R.L., & Kim, Y.D. (2005). Adaptive inventory control models for supply chain management. The International Journal of Advanced Manufacturing Technology, 26(9-10), 1184-1192.

Rad, R.H., Razmi, J., Sangari, M.S., & Ebrahimi, Z.F. (2014). Optimizing an integrated vendor-managed inventory system for a single-vendor two-buyer supply chain with determining weighting factor for vendor׳ s ordering cost. International Journal of Production Economics, 153, 295-308.

Sarkar, B., Majumder, A., Sarkar, M., Kim, N., & Ullah, M. (2018). Effects of variable production rate on quality of products in a single-vendor multi-buyer supply chain management. The International Journal of Advanced Manufacturing Technology, 99(1), 567-581.

Taleizadeh, A.A., Niaki, S.T.A., & Makui, A. (2012). Multiproduct multiple-buyer single-vendor supply chain problem with stochastic demand, variable lead-time, and multi-chance constraint. Expert Systems with Applications, 39(5), 5338-5348.

Tarhini, H., Karam, M., & Jaber, M.Y. (2020). An integrated single-vendor multi-buyer production inventory model with transhipments between buyers. International Journal of Production Economics, 225, 107568.

Vandana, & Sana, S.S. (2020). A two-echelon inventory model for ameliorating/deteriorating items with single vendor and multi-buyers. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 90(4), 601-614.

Wensing, T. (2011). Periodic review inventory systems. Lecture notes in Economics and Mathematical Systems. London New York: Springer Heidelberg Dordrecht.

Woo, Y.Y., Hsu, S.L., & Wu, S. (2001). An integrated inventory model for a single vendor and multiple buyers with ordering cost reduction. International Journal of Production Economics, 73(3), 203-215.

Yang,P.C., & Wee, H.M. (2002). A single-vendor and multiple-buyers production- inventory policy for a deteriorating item. European Journal of Operational Research, 143(3), 570-581.

Zavanella, L., & Zanoni, S. (2009). A one-vendor multi-buyer integrated production-inventory model: The ‘Consignment Stock‘ case. International Journal of Production Economics, 118(1), 225-232.

Published

11.05.2023

How to Cite

Adegbola, K. (2023). A simulation study of single-vendor, single and multiple-manufacturers supply chain system, with stochastic demand and two distribution policies. Journal of Decision Analytics and Intelligent Computing, 3(1), 62–79. https://doi.org/10.31181/jdaic10010052023a